這篇文章主要介紹了nagios中check_openmanage插件學怎么用，具有一定借鑒價值，感興趣的朋友可以參考下，希望大家閱讀完這篇文章之后大有收獲，下面讓小編帶著大家一起了解一下。

創新互聯建站于2013年開始，先為榆陽等服務建站，榆陽等地企業，進行企業商務咨詢服務。為榆陽企業網站制作PC+手機+微官網三網同步一站式服務解決您的所有建站問題。

check_openmanage現在是epel的一個項目，所以安裝了epel-release就可以使用yum來安裝check_openmanage插件了。

前提是被監控端已經安裝了dell omsa（open management server administrator）程序。

#yum -y install nagios-plugins-openmanage.x86_64

插件路徑在：

#/usr/lib64/nagios/plugins/openmanage

#cp /usr/lib64/nagios/plugins/openmanage /usr/local/nagios/libexec/

epel和omsa如何安裝可以從網上google一下

被檢測端安裝還是nagios端安裝，就看檢測的環境了。

如果可以使用snmp，在nagios端安裝這個插件即可。

如果只能使用nrpe就在被監控的機器上安裝插件。

可檢查的項目列表：

Storage components checked:

·         Controllers

·         Physical drives

·         Logical drives

·         Cache batteries

·         Connectors (channels)

·         Enclosures

·         Enclosure fans

·         Enclosure power supplies

·         Enclosure temperature probes

·         Enclosure management modules (EMMs)

Chassis components checked:

·         Processors

·         Memory modules

·         Cooling fans

·         Temperature probes

·         Power supplies

·         Batteries

·         Voltage probes

·         Power usage

·         Chassis intrusion

·         Removable flash media (SD cards)

Other:

·         ESM Log health

·         ESM Log content (default disabled)

·         Alert Log content (default disabled, not SNMP)

nagios可以通過snmp來檢測主機狀態，也可以使用npre來進行檢測。使用nrpe時需要先定義相應的command（類似于其他服務的檢查）

使用snmp時nagios的command.cfg的配置

# Openmanage check via SNMP

define command {

   command_name    check_openmanage

   command_line    /path/to/check_openmanage -H $HOSTADDRESS$

}

給監控機配置文件增加omsa監控

# Dell OMSA status

define service {

   use                       generic-service

   hostgroup_name            dell-servers

   service_description       Dell OMSA

   check_command             check_openmanage

}

對比發現，snmp獲取信息的速度快要快于本機的自檢。因此使用nrpe時需要帶上參數-t 30 （延時 30秒）

自帶的幫助信息：

$ check_openmanage -h

Usage: check_openmanage [OPTION]...

GENERAL OPTIONS:（公共的參數，snmp和本地都可以用）

  -f, --config         Specify configuration file

  -p, --perfdata       Output performance data [default=no]

  -t, --timeout        Plugin timeout in seconds [default=30]

  -c, --critical       Custom temperature critical limits

  -w, --warning        Custom temperature warning limits

  -F, --fahrenheit     Use Fahrenheit as temperature unit

  -d, --debug          Debug output, reports everything

  -h, --help           Display this help text

  -V, --version        Display version info

SNMP OPTIONS:（SNMP方式）

  -H, --hostname       Hostname or IP (required for SNMP) （check_openmanage -H 1.2.3.4 ）

  -C, --community      SNMP community string [default=public]

  -P, --protocol       SNMP protocol version [default=2]

  --port               SNMP port number [default=161]

  -6, --ipv6           Use IPv6 instead of IPv4 [default=no]

  --tcp                Use TCP instead of UDP [default=no]

OUTPUT OPTIONS:

  -i, --info           Prefix any alerts with the service tag

  -e, --extinfo        Append system info to alerts

  -s, --state          Prefix alerts with alert state

  -S, --short-state    Prefix alerts with alert state abbreviated

  -o, --okinfo         Verbosity when check result is OK

  -B, --show-blacklist Show blacklistings in OK output

  -I, --htmlinfo       HTML output with clickable links

CHECK CONTROL AND BLACKLISTING:

  -a, --all            Check everything, even log content

  -b, --blacklist      Blacklist missing and/or failed components 檢查黑名單

  --only               Only check a certain component or alert type 檢查單獨項

  --check              Fine-tune which components are checked 檢查組合項

  --no-storage         Don't check storage

For more information and advanced options, see the manual page or URL:

http://folk.uio.no/trondham/software/check_openmanage.html

snmp執行結果：

[root@op omsa]# check_openmanage -H localhost

Controller 0 [PERC 6/i Integrated]: Firmware '6.1.1-0047' is out of date

#輸出帶有狀態提示的信息

[root@op omsa]# check_openmanage -H localhost  -s

WARNING: Controller 0 [PERC 6/i Integrated]: Firmware '6.1.1-0047' is out of date

#此命令就是使用了黑名單，不檢查Firmware固件版本更新提示。

[root@localhost etc]# /usr/lib/nagios/plugins/check_openmanage -H 1.2.3.4 -s -b ctrl_fw=0

OK - System: 'PowerEdge R710', SN: 'XXXXXX', 16 GB ram (8 dimms), 1 logical drives, 6 physical drives

#只檢查電源

[root@localhost etc]# /usr/lib/nagios/plugins/check_openmanage -H 1.2.3.4 -s --only power

POWER OK - 2 power supplies checked

單項檢查參數表

Keyword	Effect
critical	Only output critical alerts. It is possible to use the--check option together with this option to adjust checks.
warning	Only output warning alerts. It is possible to use the--check option together with this option to adjust checks.
chassis	Only check chassis components, i.e. everything but storage and log content.
storage	Only check storage components
memory	Only check memory modules
fans	Only check fans
power	Only check power supplies
temp	Only check temperatures
cpu	Only check processors
voltage	Only check voltage probes
batteries	Only check batteries
amperage	Only check power usage
intrusion	Only check chassis intrusion
sdcard	Only check removable flash media
servicetag	Only check for sane service tag
esmhealth	Only check ESM log health
esmlog	Only check ESM log content
alertlog	Only check alertlog content

#檢查存儲信息，并不檢查FirmWare信息

[root@localhost etc]# /usr/lib/nagios/plugins/check_openmanage -H 1.2.3.4 -s --only storage -b ctrl_fw=0

STORAGE OK - 6 physical drives, 1 logical drives

#如果想在信息顯示的時候知道哪些信息是放到了黑名單中，可以在命令最后加參數 -B

[root@localhost etc]# /usr/lib/nagios/plugins/check_openmanage -H 1.2.3.4 -s -b ctrl_fw=0 -B

OK - System: 'PowerEdge R710', SN: 'XXXXXX', 16 GB ram (8 dimms), 1 logical drives, 6 physical drives

----- BLACKLISTED: ctrl_fw=0

黑名單功能中可以使用的參數表

Component	Comment
ctrl	Controller
ctrl_fw	Suppress the "special" warning message about old controller firmware. Use this if you can't or won't upgrade thefirmware.
ctrl_driver	Suppress the "special" warning message about old controller driver. Particularly useful on systems where you can't upgrade the driver.
ctrl_stdr	Suppress the "special" warning message about old Windows storport driver.
pdisk	Physical disk.
pdisk_cert	Ignore warnings for non-certified physical drives未配置的磁盤
pdisk_foreign	Ignore warnings for foreign physical drives外部磁盤例如：pdisk_foreign=1:0:5
vdisk	Logical drive (virtual disk)
bat	Controller cache battery
bat_charge	Ignore warnings related to the controller cache battery charging cycle, which happens approximately every 40 days on Dell servers. Note that using this blacklist keyword makes check_openmanage ignore non-critical cache battery errors.
conn	Connector (channel)
encl	Enclosure
encl_fan	Enclosure fan
encl_ps	Enclosure power supply
encl_temp	Enclosure temperature probe
encl_emm	Enclosure management module (EMM)
dimm	Memory module
fan	Fan (Cooling device)
ps	Powersupply
temp	Temperature sensor
cpu	Processor (CPU)
volt	Voltage probe
bp	System battery
amp	Amperage probe (power consumption monitoring)
intr	Intrusion sensor
sd	Removable flash media (SD card)

#個性化輸出信息

參數 --postmsg

$ check_openmanage --postmsg 'NOTE: Service tag: %s - Dell support: 555-1234-5678'

Power Supply 0 [AC]: Presence Detected, Failure Detected, AC Lost

Controller 0 [PERC 6/i Integrated]: Driver '00.00.03.15-RH1' is out of date

NOTE: Service tag: JV8KH0J - Dell support: 555-1234-5678

參數表：

Code	Replaced with
%m	System model
%s	Service tag
%b	BIOS version
%d	BIOS release date
%o	Operating system name
%r	Operating system release
%p	Number of physical drives
%l	Number of logical drives
%n	Line break
%%	A literal %

可以使用-d或者--debug來顯示所有檢查項目：

[root@localhost etc]# /usr/lib/nagios/plugins/check_openmanage -H 1.2.3.4 -d

  System:      PowerEdge R710           OMSA version:    7.2.0

  ServiceTag:  XXXXXX                  Plugin version:  3.7.9

  BIOS/date:   1.0.4 03/09/2009         Checking mode:   SNMPv2c UDP/IPv4

-----------------------------------------------------------------------------

  Storage Components

=============================================================================

 STATE  |    ID    |  MESSAGE TEXT

---------+----------+--------------------------------------------------------

WARNING |        0 | Controller 0 [PERC 6/i Integrated]: Firmware '6.1.1-0047' is out of date

     OK |        0 | Controller 0 [PERC 6/i Integrated] is Degraded

     OK |  0:0:0:0 | Physical Disk 0:0:0 [SAS-HDD 146GB] on ctrl 0 is Online

     OK |  0:0:0:1 | Physical Disk 0:0:1 [SAS-HDD 146GB] on ctrl 0 is Online

     OK |  0:0:0:2 | Physical Disk 0:0:2 [SAS-HDD 146GB] on ctrl 0 is Online

     OK |  0:0:0:3 | Physical Disk 0:0:3 [SAS-HDD 146GB] on ctrl 0 is Online

     OK |  0:1:0:4 | Physical Disk 1:0:4 [SAS-HDD 146GB] on ctrl 0 is Online

     OK |  0:1:0:5 | Physical Disk 1:0:5 [SAS-HDD 146GB] on ctrl 0 is Ready (Dedicated HS)

     OK |      0:0 | Logical Drive '/dev/sda' [RAID-5, 544.50 GB] is Ready

     OK |      0:0 | Cache Battery 0 in controller 0 is Ready

     OK |      0:0 | Connector 0 [SAS] on controller 0 is Ready

     OK |      0:1 | Connector 1 [SAS] on controller 0 is Ready

     OK |    0:0:0 | Enclosure 0:0:0 [Backplane] on controller 0 is Ready

     OK |    0:1:0 | Enclosure 0:1:0 [Backplane] on controller 0 is Ready

-----------------------------------------------------------------------------

  Chassis Components

=============================================================================

 STATE  |  ID  |  MESSAGE TEXT

---------+------+------------------------------------------------------------

     OK |    0 | Memory module 0 [DIMM_A2, 2048 MB] is Ok

     OK |    1 | Memory module 1 [DIMM_A3, 2048 MB] is Ok

     OK |    2 | Memory module 2 [DIMM_A5, 2048 MB] is Ok

     OK |    3 | Memory module 3 [DIMM_A6, 2048 MB] is Ok

     OK |    4 | Memory module 4 [DIMM_B2, 2048 MB] is Ok

     OK |    5 | Memory module 5 [DIMM_B3, 2048 MB] is Ok

     OK |    6 | Memory module 6 [DIMM_B5, 2048 MB] is Ok

     OK |    7 | Memory module 7 [DIMM_B6, 2048 MB] is Ok

     OK |    0 | Chassis fan 0 [System Board FAN 1 RPM] reading: 3960 RPM

     OK |    1 | Chassis fan 1 [System Board FAN 2 RPM] reading: 3960 RPM

     OK |    2 | Chassis fan 2 [System Board FAN 3 RPM] reading: 3960 RPM

     OK |    3 | Chassis fan 3 [System Board FAN 4 RPM] reading: 3960 RPM

     OK |    4 | Chassis fan 4 [System Board FAN 5 RPM] reading: 3840 RPM

     OK |    0 | Power Supply 0 [AC]: Presence detected

     OK |    1 | Power Supply 1 [AC]: Presence detected

     OK |    0 | Temperature Probe 0 [System Board Ambient Temp] reads 27 C (min=8/3, max=42/47)

     OK |    0 | Processor 0 [Intel Xeon E5506 2.13GHz] is Present

     OK |    1 | Processor 1 [Intel Xeon E5506 2.13GHz] is Present

     OK |    0 | Voltage sensor 0 [CPU1 VCORE] is Good

     OK |    1 | Voltage sensor 1 [CPU2 VCORE] is Good

     OK |    2 | Voltage sensor 2 [CPU2 0.75 VTT CPU2 PG] is Good

     OK |    3 | Voltage sensor 3 [CPU1 0.75 VTT CPU1 PG] is Good

     OK |    4 | Voltage sensor 4 [System Board 1.5V PG] is Good

     OK |    5 | Voltage sensor 5 [System Board 1.8V PG] is Good

     OK |    6 | Voltage sensor 6 [System Board 3.3V PG] is Good

     OK |    7 | Voltage sensor 7 [System Board 5V PG] is Good

     OK |    8 | Voltage sensor 8 [CPU2 MEM PG] is Good

     OK |    9 | Voltage sensor 9 [CPU1 MEM PG] is Good

     OK |   10 | Voltage sensor 10 [CPU2 VTT ] is Good

     OK |   11 | Voltage sensor 11 [CPU1 VTT ] is Good

     OK |   12 | Voltage sensor 12 [System Board 0.9V PG] is Good

     OK |   13 | Voltage sensor 13 [CPU2 1.8 PLL  PG] is Good

     OK |   14 | Voltage sensor 14 [CPU1 1.8 PLL PG] is Good

     OK |   15 | Voltage sensor 15 [System Board 8.0 V PG] is Good

     OK |   16 | Voltage sensor 16 [System Board 1.1 V PG] is Good

     OK |   17 | Voltage sensor 17 [System Board 1.0 LOM PG] is Good

     OK |   18 | Voltage sensor 18 [System Board 1.0 AUX PG] is Good

     OK |   19 | Voltage sensor 19 [System Board 1.05 V PG] is Good

     OK |    0 | Battery probe 0 [System Board CMOS Battery] is Presence Detected

     OK |    0 | Chassis intrusion 0 detection: Ok (Not Breached)

-----------------------------------------------------------------------------

  Other messages

=============================================================================

 STATE  |  MESSAGE TEXT

---------+-------------------------------------------------------------------

     OK | ESM log health is Ok (less than 80% full)

     OK | Chassis Service Tag is sane

#使用檢查配置文件進行個性化項目檢查。使用參數-f

check_openmanage -f /etc/check_openmanage.conf

check_openmange 安裝與使用

客戶端 1,下載Openmange的版本軟件:

cd /opt/ wget http:/support.dell.com (這里是網上的地址) mon02-001 /opt/DELL/dell 下面有 OM_6.1.0_ManNode_A00.tar 把這個下載下來

tar zxvf omsa...*.tgz

sh ./setup.sh

有三次選擇，

 輸入y, 表示接受協議，

 輸入6，表示選擇全部組件，

 輸入i,    表示安裝所選擇

 安裝時提示安裝的路徑，選擇默認路徑的就行（/opt/dell/srvadmin/）   建議自己定義下目錄位置  /usr/local/openmanage

以下是我安裝的時候出現的錯誤（僅供參考）出錯有：

   1. libstdc++.so.5 找不到

安裝：compat-libstdc 相關版本的軟件就好

   2.libcurl.so.3 找不到

安裝curl 就OK 了

我們現在做的是用client 端和服務端都在一起

wget http://folk.uio.no/trondham/software/files/check_openmanage-3.6.5.tar.gz （mon02-001 /opt/DELL 有這個包）

tar zxvf check_openmanage-3.6.5.tar.gz

cp /tar包/check_openmanage 這個Perl 腳本 放到/usr/local/nagios/libexec 里面

client 端 ：定義 nrpe.cfg

vi /usr/local/nagios/etc/nrpe.cfg

add 增加一行

command[check_dell_hardware]=/usr/local/nagios/libexec/check_openmanage -e --only critical

保存下。

運行 /usr/local/nagios/libexec/check_openmanage -e --only critical 看是否有返回值。如果返回都OK ，客戶端設置完畢。

以下設置服務端：

server 端里定義service:

define service {

  use                        saa-service

  host_name                  localhost

  service_description        check_hardware

  check_command              check_nrpe!check_dell_hardware

}

其中的localhost 根據監控的機器變動主機名。

檢測監控是否成功：

服務端/usr/local/nagios/libexec/check_nrpe -H hostIP -c check_dell_hardware

如果有問題檢測 NRPE 是否正常。

下面的用SNMP 安裝服務端

   服務端

安裝： 1，安裝相關Perl-snmp軟件包

 perl-Crypt-DES-2.05-3.2.el5.rf.i386.rpm

 perl-Digest-HMAC-1.01-2.2.el5.rf.noarch.rpm

 perl-Digest-SHA1-2.12-2.el5.rf.i386.rpm

 perl-Net-SNMP-5.2.0-1.2.el5.rf.noarch.rpm

 perl-Socket6-0.23-1.el5.rf.i386.rpm

 安裝順序安裝其他包，最后安裝perl-Net-SNMP-5.2.0-1.2.el5.rf.noarch.rpm

下載check_openmanage 插件 (http://folk.uio.no/trondham/software/check_openmanage.html#download) 根據系統的不同，下載不同的軟件。

wget http://folk.uio.no/trondham/software/files/check_openmanage-3.6.5.tar.gz

wget http://folk.uio.no/trondham/software/files/nagios-plugins-check-openmanage-3.6.5-1.el5.x86_64.rpm

上面是簡單的安裝，有些地方是直接復制別人的。 安裝沒什么花頭的，所以看下應該都能會。

下面的是使用，一些參數的剪輯。

check_openmanage -s 顯示詳細的服務狀態報警 check_openmanage -S 顯示簡短的服務狀態報警 （也就是critcal 簡寫成C）

check_openmanage -i 以服務編號為前綴的服務狀態報警

例：[JV8KH0J] Controller 0 [PERC 6/i Integrated]: Driver '00.00.03.15-RH1' is out of date

check_openmanage -e 顯示機器的類型和報警信息（以單線為區分號 顯示機器的系統 機型 服務號 ）

例：Power Supply 0 [AC]: Presence Detected, Failure Detected, AC Lost Controller 0 [PERC 6/i Integrated]: Driver '00.00.03.15-RH1' is out of date

 ------ SYSTEM: PowerEdge 1950, SN: JV8KH0J

check_openmanage --postmsg 'NOTE: Service tag: %s - Dell support: 800-8888-8888' 根據參數 --postmsg 可以自定義提示信息。

Power Supply 0 [AC]: Presence Detected, Failure Detected, AC Lost Controller 0 [PERC 6/i Integrated]: Driver '00.00.03.15-RH1' is out of date NOTE: Service tag: JV8KH0J - Dell support: 800-8888-8888

其中 %s 是系統內部的變量調用，以下是所有的內部變量

%m System model 機器型號

%s Service tag 服務編號

%b BIOS version bios 版本

%d BIOS release date Bios 發布日期

%o Operating system name 系統名稱

%r Operating system release 操作系統的版本

%p Number of physical drives 物理驅動器數

%l Number of logical drives 邏輯驅動器數

%n Line break 換行符

%% A literal % 一個文字％

以上報警信息 可以多參數一起使用。例如： check_openmanage -i -s

check_openmanage -o 默認情況下，輸出的OK 信息為一行，我們可以控制的，可以輸入check_openmanage -o 3 顯示3行，并且顯示一些硬件的底層。

check_openmanage -H localhost -b ctrl_driver=all -b pdisk=1:0:0:1 -B Openmanage 可以控制黑名單，通俗的說也就是無關涇要的監控，使用參數 -b 可以添加不要監控的項，但是等黑名單多了的時候，我們就無法知道到底什么被去掉了，這個時候 在后面加個 -B =（show-blacklist） 顯示被黑的名單。。

check_openmanage -d 顯示軟件運行后的debug信息。 （這個是我們人工手動調試的時候用的，在nagios 里面不要使用這個選項）

自定義溫度閥值

omreport 這是裝好openmanage 的自檢程序

omreport chassis temps 顯示機器的溫度

check_openmanage -H myhost --only temp -d 這是check_openmanage 的調試 ，顯示機器的溫度，我們可以定義閥值報警的。

check_openmanage -w 0=30 -c 0=40 更改溫度報警閥值

check_openmanage -w 0=30/15 -c 0=40/10 這個表示15分鐘 如果溫度大于30，warning,10分鐘大于40，critcal. 這個可以自己更具需要更改時間寫

添加黑名單

當一些不重要的信息我們不想看到的時候，我們可以根據 -b 來調試。

例如：

check_openmanage -s -b ctrl_driver=0,1 不檢測 Controller 的驅動問題。 如果所有的Controller驅動都不需要監控 可以使用ctrl_driver=all

以下是設備的代號（縮寫）：

==- 利用--check 來檢測單個項目 0表示關閉，1表示開啟

check_openmanage --check storage=0,esmlog=1 關閉檢測存儲，查看esmlog 信息

我們也可以定義一個文件，然后用--check 來執行文件里面定義的check 項目（方便我們每次的重復操作） vi /tmp/check_openmanage.check storage=0,esmlog=1

check_openmanage --check /tmp/check_openmanage.check

==- 利用--only 來監控指定項目

check_openmanage --only storage 只檢查 存儲，其他的任何的都不監控

以下是Only 的一些參數

== 如果想check 所有， check_openmanage -a 就check 所有了。

最后就是結合 PNP4Nagios 用圖片顯示信息。

注：

本人在裝的時候發現一個比較嚴重的問題：

Openmange 這個軟件不要重復的在服務器上卸載，安裝，這樣的話會導致多出很多進程，每裝一次 他們會生成3個為一組的進程例如以下：

root     30672  0.0  0.0  21688  1056 ?        S    Jun08   0:00  \_ hald-runner

68       30680  0.0  0.0  12320   848 ?        S    Jun08   0:00      \_ hald-addon-acpi: listening on acpid socket /var/run/acpid.socket

68       30693  0.0  0.0  12320   844 ?        S    Jun08   0:00      \_ hald-addon-keyboard: listening on /dev/input/event0

而且你卸載這個軟件過后，這個進程是不會Kill 掉的，只有人工手動kill, 還有這個進程多了很多以后占用CPU 資源很多， 每十分鐘CPU LOAD 有個波動。 我們公司的app 服務器就是因為裝了這個  load 會每十分鐘波動一次，從1波動到20， 然后馬上下降，所以大家一定要注意，不要在生產環境中重復的安裝和卸載。

其他的方面沒什么問題，軟件還是蠻好用的，可以結合nagios 和 zabbix  實現硬件監控。

DELL openmanage and nagios on ubuntu 10.04PDFPrintE-mail

Linux

Written by Michael

Thursday, 28 July 2011 19:51

The dell openmanage tools are quite good for monitoring Dell servers. Although it slows down boot time (which shouldn't happen often with servers anyway), it provides some great ways to monitor your server.

Install Dell OMSA

add the repositories to a new file /etc/apt/sources.list.d/linux.dell.com.sources.list with the following content:

deb http://linux.dell.com/repo/community/deb/latest /

apt-get update

gpg --keyserver pgpkeys.mit.edu --recv-key E74433E25E3D7775

gpg -a --export E74433E25E3D7775 | apt-key add -

apt-get install srvadmin-all

Install the nagios check_openmanage plugin

Download the latest check_openmanage package from http://folk.uio.no/trondham/software/check_openmanage.html#download

wget http://folk.uio.no/trondham/software/files/check-openmanage_3.6.8-1_all.deb

Install the openManage package:

dpkg -i check-openmanage_3.6.6-1_all.deb

Check theoutput of:

/usr/lib/nagios/plugins/check_openmanage

If you get the following output:

Storage Error! No controllers found

Problem running 'omreport chassis memory': Error: Memory object not found

Problem running 'omreport chassis fans': Error! No fan probes found on this system.

Problem running 'omreport chassis temps': Error! No temperature probes found on this system.

Problem running 'omreport chassis volts': Error! No voltage probes found on this system.

Do:

/etc/init.d/dataeng restart

Rerun it, and blacklist warnings like 'Not certified drives' and controller firmware out of date like(or resolve them by swapping to certified disks and upgrade the raidcontroller firmware):

/usr/lib/nagios/plugins/check_openmanage -b ctrl_fw=0/pdisk=0:0:0:0,0:0:0:1

If you run it, it should show something like:

/usr/lib/nagios/plugins/check_openmanage -b ctrl_fw=0/pdisk=0:0:0:0,0:0:0:1

OK - System: 'PowerEdge R310', SN: 'somenumber', 4 GB ram (2 dimms), 1 logical drives, 2 physical drives

Only uncertified hard drives should be blacklisted, certified disks do not have to be blacklisted.

Make sure that dataeng starts at boot

update-rc.d dataeng defaults

Edit:

/etc/nagios/nrpe_local.cfg

And add the command without warnings to it, like:

command[check_openmanage]=/usr/lib/nagios/plugins/check_openmanage -b ctrl_fw=0/pdisk=0:0:0:0,0:0:0:1

Restart the service:

/etc/init.d/nagios-nrpe-server restart

Add the host to the nagios configuration on your Nagios server.

Optionally, you can start the openmanage built in webserver with

omconfig system webserver action=start

The webserver is running on port 1311 https by default. You can login with the root account or other local accounts of the linux system.

感謝你能夠認真閱讀完這篇文章，希望小編分享的“nagios中check_openmanage插件學怎么用”這篇文章對大家有幫助，同時也希望大家多多支持創新互聯，關注創新互聯行業資訊頻道，更多相關知識等著你來學習!

名稱欄目：nagios中check_openmanage插件學怎么用
URL標題：http://jinyejixie.com/article34/pppjse.html

成都網站建設公司_創新互聯，為您提供外貿建站、網站維護、企業網站制作、軟件開發、動態網站、搜索引擎優化

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯