這篇文章解釋了如何在聯機或歸檔重做日志文件中獲取轉儲。

網站建設哪家好，找成都創新互聯公司！專注于網頁設計、網站建設、微信開發、重慶小程序開發、集團企業網站建設等服務項目。為回饋新老客戶創新互聯還提供了巨野免費建站歡迎大家使用！

約束和限制:
1。數據庫必須安裝(或打開)。
更改系統轉儲日志文件與任何實例無關，因此不需要為其操作安裝數據庫。
但是，在ALTER SYSTEM DUMP REDO的情況下，系統需要知道實例是什么，以及其他日志文件在哪里。
此查找需要控制文件，因此必須安裝或打開數據庫。

2。DUMP REDO限制在控制文件中識別的日志文件集。
因?yàn)槲覀冊诳刂莆募胁檎胰罩疚募蛯?shí)例，如果在控制文件中有未引用的重做日志，那么這些重做日志將不會在轉儲文件中被考慮。
這樣做的一個例子是，如果將日志文件刪除，手動或?qū)嵗龔腞AC集群中刪除。

3。所有的日志文件都必須從調用實例中訪問，盡管所有的聯機重做日志都存儲在共享磁盤上，但是每個實例的歸檔日志不需要。

 

下面介紹了轉儲重做日志文件的方法:

1. To dump records based in DBA (Data Block Address)
2. To dump records based on RBA (Redo Block Address)
3. To dump records based on SCN
4. To dump records based on time
5. To dump records based on layer and opcode
6. Dump the file header information
7. Dump an entire log file:

1. To dump records based on DBA (Data Block Address)
--------------------------------------------------
This will dump all redo records for the range of data
blocks specified for a given file # and block # range.
From sqlplus (sqldba or svrmgr for older versions), issue the following command:
ALTER SYSTEM DUMP LOGFILE 'filename'
DBA MIN fileno blockno
DBA MAX fileno blockno;
Example:
========
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
DBA MIN 5 31125
DBA MAX 5 31150;
這將導致對指定范圍的數據塊進行所有更改。
轉儲到跟蹤文件。在給定的示例中，所有重做文件#5的記錄，
第31125至31150條被dump

Note
====
For 10g:
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
DBA MIN 5 . 31125 DBA MAX 5 31150;

will raise:
ORA-01963: Must specify a block number

In 10g we need to skip the dot '.' while doing the redo dumps
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
DBA MIN 5 31125 DBA MAX 5 31150;

2. To dump records based on RBA (Redo Block Address)
-------------------------------------------------
This will dump all redo records for the range of redo
addresses specified for the given sequence number and block number.
Syntax:
ALTER SYSTEM DUMP LOGFILE 'filename'
RBA MIN seqno blockno
RBA MAX seqno blockno;
Example:
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
RBA MIN 2050 13255
RBA MAX 2255 15555;

3. To dump records based on SCN
----------------------------
Using this option will cause redo records owning changes within the SCN range
specified to be dumped to the trace file.
ALTER SYSTEM DUMP LOGFILE 'filename'
SCN MIN minscn
SCN MAX maxscn;
Example:
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
SCN MIN 103243
SCN MAX 103294;

If the purpose is to check the dumpfile you can rather do the following,
SQL> ALTER SYSTEM DUMP LOGFILE 'filename' SCN MIN 1 SCN MAX 1;

If the above completes sucessfully it ensures no issues with the archivelog.

4. To dump records based on time.
------------------------------
Using this option will cause redo records created within the time range
specified to be dumped to the trace file.
From sqlplus (sqldba or svrmgr for older versions), issue the following command:
ALTER SYSTEM DUMP LOGFILE 'filename'
TIME MIN value
TIME MAX value;
Example:
========
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
TIME MIN 299425687
TIME MAX 299458800;
Please Note: the time value is given in REDO DUMP TIME
5. To dump records based on layer and opcode.
------------------------------------------
LAYER and OPCODE are used to dump all log records for a particular type of
redo record, such as all dropped row pieces.
From sqlplus (sqldba or svrmgr for older versions), issue the following command:
ALTER SYSTEM DUMP LOGFILE 'filename'
LAYER value
OPCODE value;
Example:
========
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf'
LAYER 11
OPCODE 3; 

6. Dump the file header information:
---------------------------------
This will dump file header information for every
online redo log file.
From sqlplus (sqldba or svrmgr for older versions), issue the following command:
alter session set events 'immediate trace name redohdr level 10';

For dumping archivelog header,issue the following command:

ALTER SYSTEM DUMP LOGFILE 'filename' RBA MIN 1 1 RBA MAX 1 1;
7. Dump an entire log file:
------------------------
From sqlplus (sqldba or svrmgr for older versions), issue the following command:
ALTER SYSTEM DUMP LOGFILE 'filename';
Please note:
Fully qualify the filename, and include the single quotes. 

Example:
========
ALTER SYSTEM DUMP LOGFILE 'u01/oracle/V7323/dbs/arch2_76.dbf';

補充：
ALTER SYSTEM DUMP REDO [option] .... [option];

[options] -> scn min [scn] | scn max [scn] |
dba min [file#] [block#] | dba max [file#] [block#] |
time min [ub4] | time max [ub4] |
layer [word] |
opcode [word] |
objno [word] |
xid [undoseg#] [slot#] [wrap#] |
validate

參考：How to Dump Redo Log File Information (文檔 ID 1031381.6)

本文題目：oracle之如何dumplogfile-創新互聯
標題路徑：http://jinyejixie.com/article26/dehhjg.html

成都網站建設公司_創新互聯，為您提供微信公眾號、搜索引擎優化、App設計、網站收錄、全網營銷推廣、網站建設

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯