主要使用了ssh隧道技術：

為府谷等地區用戶提供了全套網頁設計制作服務，及府谷網站建設行業解決方案。主營業務為成都網站建設、成都網站設計、府谷網站設計，以傳統方式定制建設網站，并提供域名空間備案等一條龍服務，秉承以專業、用心的態度為用戶提供真誠的服務。我們深信只要達到每一位用戶的要求，就會得到認可，從而選擇與我們長期合作。這樣，我們也可以走得更遠！

經常隧道會自動斷開的原因：隧道可能因?yàn)槟承┰驍嚅_(kāi)，例如：機器重啟，長時間沒有數據通信而被路由器切斷等等。

OpenSSH基于安全的理由，如果用戶連線到SSH Server后閑置一段時間，SSH Server會在超過特定時間后自動終止SSH連線。

保持長連接，我們需要了解這幾個參數：

TCPKeepAlive yes/no for ssh and sshd

ClientAliveCountMax for sshd

ClientAliveInterval for sshd

ServerAliveCountMax for ssh

ServerAliveInterval for ssh

To enable the keep alive system-wide (root access required), edit /etc/ssh/ssh_config; to set the settings for just your user, edit ~/.ssh/config (create the file if it doesn’t exist). Insert the following:

Host *

  ServerAliveInterval 300

  ServerAliveCountMax 2

You can also make your OpenSSH server keep alive all connections with clients by adding the following to /etc/ssh/sshd_config:

ClientAliveInterval 300

ClientAliveCountMax 2

 connection idle timeout setting

ServerAliveCountMax

Sets the number of server alive messages (see below) which may be sent without ssh(1) receiving any messages back from the server. If this threshold is reached while server alive messages are being sent, ssh will disconnect from the server, terminating the session. It is important to note that the use of server alive messages is very different from TCPKeepAlive (below). The server alive messages are sent through the encrypted channel and therefore will not be spoofable. The TCP keepalive option enabled by TCPKeepAlive is spoofable. The server alive mechanism is valuable when the client or server depend on knowing when a connection has become inactive.

The default value is 3. If, for example, ServerAliveInterval (see below) is set to 15 and ServerAliveCountMax is left at the default, if the server becomes unresponsive, ssh will disconnect after approximately 45 seconds. This option applies to protocol version 2 only; in protocol version 1 there is no mechanism to request a response from the server to the server alive messages, so disconnection is the responsibility of the TCP stack.

ServerAliveInterval

Sets a timeout interval in seconds after which if no data has been received from the server, ssh(1) will send a message through the encrypted channel to request a response from the server. The default is 0, indicating that these messages will not be sent to the server, or 300 if the BatchMode option is set. This option applies to protocol version 2 only. ProtocolKeepAlives and SetupTimeOut are Debian-specific compatibility aliases for this option.

下面是幾個參數的解釋：

TCPKeepAlive
             Specifies whether the system should send TCP keepalive messages
             to the other side.  If they are sent, death of the connection or
             crash of one of the machines will be properly noticed.  However,
             this means that connections will die if the route is down tem-
             porarily, and some people find it annoying.  On the other hand,
             if TCP keepalives are not sent, sessions may hang indefinitely on
             the server, leaving “ghost” users and consuming server resources.

             The default is “yes” (to send TCP keepalive messages), and the
             server will notice if the network goes down or the client host
             crashes.  This avoids infinitely hanging sessions.

             To disable TCP keepalive messages, the value should be set to
             “no”.
 ClientAliveCountMax
             Sets the number of client alive messages (see below) which may be
             sent without sshd(8) receiving any messages back from the client.
             If this threshold is reached while client alive messages are
             being sent, sshd will disconnect the client, terminating the ses-
             sion.  It is important to note that the use of client alive mes-
             sages is very different from TCPKeepAlive (below).  The client
             alive messages are sent through the encrypted channel and there-
             fore will not be spoofable.  The TCP keepalive option enabled by
             TCPKeepAlive is spoofable.  The client alive mechanism is valu-
             able when the client or server depend on knowing when a connec-
             tion has become inactive.

             The default value is 3.  If ClientAliveInterval (see below) is
             set to 15, and ClientAliveCountMax is left at the default, unre-
             sponsive SSH clients will be disconnected after approximately 45
             seconds.  This option applies to protocol version 2 only.
 ClientAliveInterval
             Sets a timeout interval in seconds after which if no data has
             been received from the client, sshd(8) will send a message
             through the encrypted channel to request a response from the
             client.  The default is 0, indicating that these messages will
             not be sent to the client.  This option applies to protocol ver-
             sion 2 only.
 ServerAliveInterval
             Sets a timeout interval in seconds after which if no data has
             been received from the server, ssh(1) will send a message through
             the encrypted channel to request a response from the server.  The
             default is 0, indicating that these messages will not be sent to
             the server.  This option applies to protocol version 2 only.
 ServerAliveCountMax
             Sets the number of server alive messages (see below) which may be
             sent without ssh(1) receiving any messages back from the server.
             If this threshold is reached while server alive messages are
             being sent, ssh will disconnect from the server, terminating the
             session.  It is important to note that the use of server alive
             messages is very different from TCPKeepAlive (below).  The server
             alive messages are sent through the encrypted channel and there-
             fore will not be spoofable.  The TCP keepalive option enabled by
             TCPKeepAlive is spoofable.  The server alive mechanism is valu-
             able when the client or server depend on knowing when a connec-
             tion has become inactive.

             The default value is 3.  If, for example, ServerAliveInterval
             (see below) is set to 15 and ServerAliveCountMax is left at the
             default, if the server becomes unresponsive, ssh will disconnect
             after approximately 45 seconds.  This option applies to protocol
             version 2 only.

#!/bin/bash

###################################################################################

#date:2016-12-20                               ######

#author:victor                                ######

#description:                                 ######

#this shell script is for improving the network performance to www.google.com######

###################################################################################

Ssh_Pid=`ps aux | grep '192.168.1.53'| grep -v 'grep'| awk '{print $2}'`

kill $Ssh_Pid

ssh -f -w 0:0 192.168.1.53 true

ifconfig tun0 192.168.100.2 netmask 255.255.255.252

ssh root@192.168.1.53 "ifconfig tun0 192.168.100.1 netmask 255.255.255.252"

route add -host 192.168.1.53 dev eth0

route del -net 0.0.0.0

route add -net 0.0.0.0 dev tun0

另外有需要云服務器可以了解下創新互聯scvps.cn，海內外云服務器15元起步，三天無理由+7*72小時售后在線，公司持有idc許可證，提供“云服務器、裸金屬服務器、高防服務器、香港服務器、美國服務器、虛擬主機、免備案服務器”等云主機租用服務以及企業上云的綜合解決方案，具有“安全穩定、簡單易用、服務可用性高、性價比高”等特點與優勢，專為企業上云打造定制，能夠滿足用戶豐富、多元化的應用場景需求。

本文名稱：sshtunneling-創新互聯
瀏覽路徑：http://jinyejixie.com/article24/coijje.html

成都網站建設公司_創新互聯，為您提供定制網站、品牌網站制作、網站設計、搜索引擎優化、建站公司、企業建站

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯